Our wiring harness are hand wired in our Amherst, NH shop. Using only the highest quality components. Hand selected and vintage correct.
This Tele-way wiring kit will give you better tone, clarity and more control.
We build BYOGuitar Pre-Wired Electronics using the best craftsmanship and components:
- 2 CTS Vintage Taper Audio Pot
- 250k Split Shaft w/.375" Shaft Potentiometers
- 7% Tolerance
- 30% taper (just like vintage potentiometers)
- Dished back Lowest torque possible! Tightest tolerance available! Effortless turning!
- Solid brass shaft and bushing
- Beveled edge split shaft for easy knob push on
- Oak Grigsby 3-Way switch
- Paper in Oil Capacitor
- 200V 0.047uF PIO capacitor
- 10% tolerance
- Treble Bleed Circuit
- 150K-ohm 1/4-watt resistor in parallel with a .001uF capacitor.
- Wired between the input and output lugs of the volume pot
- Smooths out treble bleed.
- Gets more uniform tone from 1 to 10
- More rounded sound at low volume.
- Vintage 22-Ga pre-tinned cloth wire
- Switchcraft Jack